Concrete mixing station models there are many, the most common are HZS25, HZS35, HZS50,
HZS60, HZS75, HZS90, HZS120, HZS180, HZS240 etc., on different types of concrete mixer mode
is different.
1, the simplicity of concrete mixing stations: typical model for HZS25, HZS35, HZS50,
HZS75. hot selling small foam concrete pump Such mixing station can change the way the material on the belt material based on
customer demand. You can choose other material on the belt mixing station HZS60, HZS90,
HZS120, HZS180, HZS240 and above large-scale commercial concrete mixing station.
2, large commercial concrete mixing station using a feeding method: concrete mixing station
production sequence summarized as: cutting – stirring – the material, large commercial
concrete mixing station for the pursuit of cutting efficiency, speed and more use of a
feeding method, mixing cement, stone, water, sand, etc. together, one next to the mixing
tube. Note: In order to reduce the phenomenon of cement dust, the lower course of the
process should be a process, should first pour sand and gravel, and cement, and then the
sand and gravel, then pour.
3, under the law of ready-mixed material: Many domestic concrete mixing station is equipped
with a compulsory mixer, Ready-mixed Concrete Batching Plant this type of machine is more suitable for ready-mixed cutting,
good cement mortar (cement and sand and gravel, and water was added to the mixing tube
inside agitation a), then stir into the concrete added separately Dan Zier. Most of the use
of ready-mixed concrete mixing stations are cutting, higher efficiency, shorter.
4, cement bound sand method: This method is often used in construction projects, mainly
used in production of high strength concrete. Use the first stone of the moisture content
of about 20%, we need to add a small amount of water into the sand and gravel surface,
allowing the stone to fully absorb water, followed by stirring Dan Zier in the feed and
water content of 20% sand, and finally adding cement can.